Kreg Owners' Community

Myself and a friend have recently started using our kreg jigs and run into a similar problem.  Both of us are having difficulty getting a tight joint with gluing it. As far as we can tell, we have set everything up right and are using the correct screws for the wood we are using. The joints just are not tight unless we use glue.

 

We would greatly appreciate any assistance that you can provide to help us get on the right track.

 

Thank you

 

Gary

Views: 350

Reply to This

Replies to This Discussion

Correction, it should have read " without gluing it."
What kind of material? What kind of joint; edge, butt, etc?
Well Gray are you using any bar clamps and Kreg has a clamp made for joints Ive got one and for the glue as the old guys here say little is more ? and use a clamp or two too keep anything from moveing as you put the scrow in. But I use alote of oak. Im getting ready to put a 7 draw drasser and a night stand and I will take some pic's of hal I do it but today I GOT TO SAND thats like doing the dishs for the old lady.
This is the way I do it but each there own way

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_