New garage/shop is 30' x 38'. The company truck sits in middle and is about 12' x 24'.
This leaves 10'x24' on sides with 12' ceilings. Behind truck is 14'x30',
8' ceilings.
Lots of space in "attic".
We are a start-up appliance installation company. A dream come true for two brothers in their late 50's. Sometimes a new install requires a lot of wood modifacations, such as: removing drawers, rails, stiles, cutting larger openings, making openings smaller, changing height of
decks that appliance sits on. Making drawers and their fronts larger/smaller to fit AND match
what exists in house. Needless to say, we already have many of the tools we need to preform these tasks BUT need a good plan, ideas, suggestions on setting up our new shop.
Since we already own a Kreg router table (and many more Kreg tools) , we will give to the one with the best plan for us, the table IF we win. Not to scare you away but we had to move our tools into shop BEFORE we had a decent plan.
WE NEED a good plan.
An idea would be good.
A suggestion would be nice.
WE'RE TRYING to win this table for you.
Tags:
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service