Great synopsis of suggestions, James! You really covered the full gamete there!
Joe, one project you may want to check out specifically is our "Wall Cabinet" project plan. It's a really simple plan, and you can easily change the measurements, etc. to meet your unique needs. Just click here, and then look for the plan called "Wall Cabinet."
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…