Kreg Owners' Community

Using MFC

I'm fairly new to the Kreg so maybe a daft question but can I put pocket holes in 18mm / 3/4 in MFC to create a small wardrobe

Views: 543

▶ Reply to This

Replies to This Discussion

Permalink Reply by Ryan Zylstra on June 3, 2014 at 8:20am

Stephen,

 

you can use the kreg jig to join mfc. be careful though, use coarse screws and set your drill's torque settings so it does not strip out the material.

Permalink Reply by Stephen Lodey on June 3, 2014 at 8:22am
Thanks, much appreciated
Permalink Reply by Gary roofner on June 4, 2014 at 8:56am

Not familiar with MFC.  What is MFC? Is it another class of MDF?

Permalink Reply by Stephen Lodey on June 4, 2014 at 9:14am
Kind of, in the UK it is melamine faced chipboard
Permalink Reply by Gary roofner on June 4, 2014 at 11:09am

Thanks I only know melamine.

▶ Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

1 Kreg Precision Router Lift

Kreg Precision Router Lift
2 20230327_145038[439]

20230327_145038[439]
3 Old Kreg Jig - K1?

Old Kreg Jig - K1?

Videos

  • Add Videos
  • View All

Forum

Kreg Precision Router Lift

Help!!!  from anyone UK or Ireland side , I have purchased the Kreg router table with the Kreg Precision Router Lift, my problem is that I cannot find a router to fit with the correct motor diameter , the list supplied by Kreg for routers to suit…Continue

Started by Mick Ledger in Beginners' Zone 10 hours ago.

Thickness error

I ripped a 2x4 board to be a true 3” instead 3.5”. The thickness of the board remains 1.5”. When I put the pocket hole in the board, the top of the hole was too high and now visible. In other words the top of the pocket was on the top of the board…Continue

Started by Ryan Ritter in Beginners' Zone Feb 26.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2023   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Sign in to chat!
_