Kreg Owners' Community

I'm planning to build an office counter using 2x4's as the frame.  Can I use the Kreg jig to build the overall frame?  Is it an overkill or waste of screws?  I rather not spend the money on nailer gun and a compressor.  

Views: 1335

Reply to This

Replies to This Discussion

Imagine if you could process all of the studs ahead of time though... Anyone could do that, a kid could do that while watching TV. Get the Kreg Jig setup, and drill holes in all of the studs. Then, get them to the jobsite and screw away! Should be pretty fast actually. And obviously way strong.
Thanks guys, I'll definitely go through this route until I absolutely need a nailer. Eventually I'm sure but not doing huge project enough to warrant the use.
I just used it to frame in a back wall for the counter back splash. . Works great but 4 screws is definitely overkill. Go with two or maybe three and that should hold just fine.
Definitely two screws is what I was thinking. I'll post up pictures in the near future :)
sounds good but why not just screw together without the pocket holes ,Framing should not show

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

4" Dust Port for Kreg router table fence?

Finally installed a 4" dust collection system in my shop. I'd like to find a 4" collection port for my Kreg router table (PRS1045) fence. Anybody know where I can find such an animal or one that can be modified to fit?Thanks!Continue

Tags: port, collection, dust, fence, Router

Started by E M Hampton in Other Kreg® Products Dec 2.

Kreg Circular Saw Track Guide Question

Hi all....Has anyone have experience using a Kreg circular saw track guide system for ripping long boards??? The boards would be 5 to 6 inches wide by 6 feet, I have a Bosch 4100 portable table saw. But ripping boards that length with a 45% angle…Continue

Started by Ed Anderson in Other Kreg® Products Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_