Kreg Owners' Community

On a bottom of a bar that I am making-I have applied cherry plywood and now I would like to apply 2 1/2 in wide solid cherry on top of the cherry plywood for a "Shaker-Look" ( Putting a face frame on top of the plywood). The bar is 2 ft. wide and 11 ft. long. My question is-can I put together this "face frame" as a unit and then apply it to the bar.  I was hoping to Kreg-jig this face frame together and then apply it as one unit onto the bar.  Will this unit be to big to do this?

Views: 184

Reply to This

Replies to This Discussion

Do you have any pictures of what you are trying to accomplish?  Might help with the visual aspect and give everyone an idea of what you want to do. 

I always build my face frame 1st,  build away then add each pc. of ply  sides first   good luck... and a pict would help

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_