Kreg Owners' Community

I've seen this term "resawing" come up quite  a bit regarding bandsaws, so naturally, i looked it up and found a very interesting video on the physics of resawing on a bandsaw.

 

Very interesting.

thought i'd share.

 

http://youtu.be/fK9m5PadmiI

 

Views: 362

Reply to This

Replies to This Discussion

I was overwhelmed by the information provided on bandsaws when I was shopping for one last year. This video was tremendous help in determining what I needed. If you need more resaw capacity, it doesn't make sense to add riser blocks (unless of course you LIKE buying saw blades). :) It certainly looks like overkill when I'm cutting pen blanks on my 18 in., 2.5 HP saw, though. 

Hugh,

How big are those pen blanks your cutting on an 18 in 2.5HP bandsaw?

Are they like baseball bat sizes? 

Russ, Thanks for sharing this information, I'm loking for a real bandsaw as my next major purchase. I need something to replace the 9'' craftsman that I found on craigs list for 25.00.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Replacing existing slides but cannot remove drawer front

The Kreg slides are made to work with new drawers before putting on the drawer front. In my situation, I cannot remove the existing fronts which means when reversing the jig to hold the draw, it’s at an angle. Not sure what I should do to make them…Continue

Started by Jay Homeyer in General Woodworking Apr 25.

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone Apr 20.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_