Kreg Owners' Community

Post the one woodworking photo you're most proud of, and why.

Views: 2485

Reply to This

Replies to This Discussion

Fills out the space and looks a heck of alot better. A+

Randy Caswell said:
I tore out this old fireplace....


...and replaced it with this fireplace and matching wainscoat.

Fabulous. Just what I want to do. The corner cabinets must have been
a bear to design and build. Any advice?
Do you a over-the-stove vent built into your microwave?

You must be very proud of your finished accomplishment.

art


david sims said:
This is an after photo of my kitchen renovation. I made my first set of cabinets.

The bottom corner cabinet is a standard size. The top corner cabinet is about two inches smaller width wise than a standard wall corner cabinet. I layed out my measurements on a sheet of 3/4" sandply and then cut out the corner cabinet base with a circular saw and straightedge. I switched to a jig saw for the last little bit of the inside corner. Then traced the bottom panel and cut that piece for the top. I used a flush cut bit on my router to clean up anything. After that you need two sides and some nailing stripps. Hope this will help get you started. I can take pics, measurements, what ever you need.

The microwave is not vented outside.

ART LA COMBE said:
Fabulous. Just what I want to do. The corner cabinets must have been
a bear to design and build. Any advice?
Do you a over-the-stove vent built into your microwave?

You must be very proud of your finished accomplishment.

art


david sims said:
This is an after photo of my kitchen renovation. I made my first set of cabinets.


Not there are any pocket holes in this (all mortise and tennon), but this was my first decent project I completed. I've done some larger things with wood, but seeing as I did the upholstery on this too it is my stand out favourite project at this time.
looks great

Ben Socratous said:


Not there are any pocket holes in this (all mortise and tennon), but this was my first decent project I completed. I've done some larger things with wood, but seeing as I did the upholstery on this too it is my stand out favourite project at this time.
John,
Good looking poker table. We had a problem of 10 guys trying to get around a 8 sided table, so I changed some plans and built a ten sided table.

Turned out well.



John Hammond said:
Another View

Attachments:


Those kitchen cabinets just look like they are done by some professional. Good job. I have searched for more cabinetry designs if anyone is interested they can look here. Once again I have got to say, great job on those kitchen cabinets.


david sims said:

This is an after photo of my kitchen renovation. I made my first set of cabinets.

Wow, some impressive works being posted!  Mine is this flag box as a memorial to my brother-in-law.  It was one of the more complex things I made to this point and it got me back into woodworking after a very long hiatus.

This is the flag that was presented to my Brother In Law by the local VFW when John was laid to rest. His Daughter,, my Wife,, chose the Quilted Maple & the background cloth. I merely had the honor of putting it all together. The shop was oddly quiet each day I worked on it. Even had a few sweaty eye moments doing this for my BIL.

Attachments:
This sofa table I made for my wife. It was the first thing I made for her.
Attachments:

VERY nice!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_