Kreg Owners' Community

Anybody have one of the old K200's that you would want to sell? It's the single hole unit where the drill is spring loaded and has an air clamp with a foot switch. Ours has a bit of a wobble now, and we've tried a new chuck which improved but did not toatally solve the problem. this unit is one of the quickest ways to drill multiple holes, I'm very disappointed that they decided to stop making it. Someone in one of the threads about replacing the K3 with the K4 I think hit the nail on the head. Kreg seems to be gearing their products more to the DIYer, and if you want to do procuction they want you to step up to a big $ unit. I'm sure the bigger multi- thousand dollar units are great, but the other problem besides the money is I would have to rearrange my shop and the way it flows to accomodate it. Now I'm REALLY worried with the phasing out of the K3 that if my old 200 dies we'll have to reach around the opposite side of the panel to clamp it, AND have to reinsert the drill into the unit each time. I would guess each hole will take anohter 30 -45 seconds to set up to drill over using the K200. Anyway, here's a picture of the unit, if you've stepped up to a different system and would like to get rid of yours I think we could make it worth your while to give up the 200! Thanks!

Views: 638


Reply to This

Replies to This Discussion

I did a google search and you can buy one new from the UK for 350 pounds. Go to
Thanks very much, Mark! I looked all over and never found this site- now I have to figure out if they will ship to us or not- Thanks again for taking the time to find that for me!

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service