Kreg Owners' Community

After a tremendous number of requests and positive feedback, we're proud to announce that the Kreg Toolboxx™ is officially back, starting August 2012!

 

The Toolboxx™ is the simplest and easiest way to store your complete Kreg Jig® collection. It features a 15 bin organizer in the top compartment and a large cavity on the bottom for the Kreg Jig® and other large components. The Toolboxx™ also features a push-to-open design which provides access to both compartments at once, a see-through clear window keeping components visible even when the Toolboxx™ is closed, and a heavy duty handle for transportation to the jobsite.

 

Best of all... the Toolboxx™ now comes with over 1,000 Kreg Screws, so you'll always have the screw you need at hand.

 

 

Kreg Toolboxx™

Comes with over 1,000 Kreg Screws:

150 - SPS-F075
150 - SML-C125
150 - SML-F125
150 - SML-C150
150 - SML-F150
150 - SPS-F1
150 - SPS-C1

Learn More at kregtool.com

$79.99 MSRP

 

 

Views: 11539

Reply to This

Replies to This Discussion

Just when I think I'm done buying tools, you come out with another must-have item.  To think of how storing my Kreg Jig would be much easier with this!!!  And it fits my plans to streamline storage in my shop/garage.  Another item for the wish-list!!

Oh Heavens No, you couldn't rerelease the Kreg Toolboxx before Fathers's Day, Noooooo.  Now I have to grovel for $80 (and try to figure out how to get rid of all these ties and hankerchiefes I got) LOL.  Really, I missed out on the initial release and sure am glad to see it's back.  Thanks Kreg!  Tom T.

Seems a little over priced to me. You can get those screws for 29 bucks and a box just like it for about 15 to 20 bucks. Nice if you can get a friend to buy it for you other then that...............not a chance. 

Yikes.. how do I get hold of one down here in 'down-under" ?? Can I order from website or do I need to find a stockist in Australia>

Just not sure if the bottom section would be deep enough to accommodate all my Kreg Klamps.

 

Hey Wow!

Not enough Pictures; is the screw container the cover lid? The swing type hinges enclosed or open to the outside?

Come on! Oh by the way my internet is Phone line and slow can't play any videos. Perhaps if they could be down loaded then played but; haven't seen this option or I'm unaware of how to. Please assist. I think I'm building my own out of light weight solid wood 3/8" or 1/2". With more storage options theirs is hardly enough.

Joseph Esquivel

 

Bought one when they first came out and I have no regrets.

Hey Joseph Murro,

Great I'm glad your happy with it; just can't grasp the full functionality of it with the single image! It seems a little small for my needs. Best wishes and may God bless.

Sincerely,

Joseph Esquivel

Kinda cool, but not worth $79.99... lower it to $39.99 and I'd buy it.

Check out the video above.  It shows the full functionality.  I am able to put all my Kreg tools in this box with room to spare.

Joseph E. Esquivel said:

Hey Joseph Murro,

Great I'm glad your happy with it; just can't grasp the full functionality of it with the single image! It seems a little small for my needs. Best wishes and may God bless.

Sincerely,

Joseph Esquivel

 

Any plans for making a toolbox? $79.99 is a little steep-$39.99 maybe???

Can you buy the box without the screws?  I have several boxes of screws but I like the idea of the box.  Currently I am using two Stanly boxes one with screws in it and one with tools.  I doubt this would reduce the cost a lot but anything would help.  I do like the concept..

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_