Kreg Owners' Community

The husky toolbox it's the 7 x 22 toolbox its $19.97 at Home Depot

I picked one up today all my clamps fit in the toolbox lots compartments for screws.  I only use the screws for 3/4 and 1 1/2. Nice compartment for countersink and screw bits and common drill bits.  Nice long slot for  pencils.

Views: 1916

Reply to This

Replies to This Discussion

I found this 23" model at Sears---SPECIAL price $10!

Product Image

Gary,

HD has the "Wide Body", (larger size),  22x13x10.6" box---

 (holding capacity of 3125 cu. in)---

 for $25.

Husky 22 in. Wide Body Tool Box

The 44lb weight capacity should hold all the Kreg Klamps nicely.

This is the kreg look alike. I'll post a picture .

Here is a picture of the toolbox from Home Depot. The top section has containers for different size screws.

Ah yes,

that's the 'ol ''cantilever'' box.

Different from what appeared when I looked up their 7x22 tool box.

Husky was the sponsor of Matt Kenseth's winning car this past weekend at Kansas Speedway.

Go Matt.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Replacing existing slides but cannot remove drawer front

The Kreg slides are made to work with new drawers before putting on the drawer front. In my situation, I cannot remove the existing fronts which means when reversing the jig to hold the draw, it’s at an angle. Not sure what I should do to make them…Continue

Started by Jay Homeyer in General Woodworking Apr 25.

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone Apr 20.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_