Kreg Owners' Community

Hi everyone , I want too make a mobile table saw cart with some storage .My dewalt tablesaw came with a stand but it takes up to much room in my little 12x12 shop .Will probably have a fold down extension wing on the left ,anyone made one ? The cart will be 2feet x 2feet square approx. Any pictures would be great .

Views: 467

Reply to This

Replies to This Discussion

micheal,

             derek kieller posted a cart he made for a planer/thicknesser it has a fold down side and everything might give you some ideas or at least somerwhere to start. the bench i built will be too long for your shed.

      jock

Thanks jock how you doing ?Have you got arm ache yet holding that massive beer glass up ha .

Michael, Here are some pictures (Facebook link, you don't need an account to view) of the one I made.  I have a one car garage.  The mobile work station houses my table saw, miter saw, router table and Kreg Jig station in one.  I need to post more pics of the finished product.  To give credit where credit is due, below my post is the LumberJocks project I used for reference.  

Mine (in progress, it's done now, you get the idea):

https://www.facebook.com/wwoodwarrior/photos/pb.607909999277380.-22...

https://www.facebook.com/wwoodwarrior/photos/pb.607909999277380.-22...

LumberJocks:

http://lumberjocks.com/projects/96606

Good luck, this is really, really handy.  

Here is the table saw cart I built. I also attached my Ryobi router table to the end of it. It's a little bigger than you are looking for but it might give you some ideas. The base is made of  2x4s and the sides and shelves are MDF. I also added a face frame to dress it up a little. The base is on locking casters. All parts are joined with glue and pocket holes.

Hi Justin many thanks for the photos ,i have now got a seed planted in my mind what I want to do .Will make of 3/4 ply measureing 20" square with a drop down leaf on the left side .Soon as I have finished this bathroom remodel I will be on it ,go steady mick.

Hi nick thanks for the pics ,a picture speaks volumes .Like your set up with the built in router table .Now I know what I am aiming for thanks ,mick.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Concealed Hinge Jig Setting Confusion

The Kreg Concealed Hinge Jig has a setting for the distance from edge of the door to the nearest edge of the 35 mm cup hole. This can be set as 3, 4, 5, or 6 mm.Later in the instruction there is a table that converts the distance from the edge of…Continue

Started by Ken Kortch in Kreg Jig® Operation Oct 11.

Help with old Rip-Cut(tm)

I have an old Rip-Cut which I bought many years ago but did not set.  I seem to have lost the instructions, if I ever had them.I cannot figure out which bolts are match with the nylon-lock screws.This unit is old enough that the current instructions…Continue

Started by Sean in Other Kreg® Products Oct 4.

Product Reviews

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 1 Comment

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am

© 2020   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_