Kreg Owners' Community

Just wanted to get some other opinions--

 

Do you prefer to stain your project before or after you get it all together?  Alot of my staining i use Minwax Polyshades.  Some stains seem to be easier to work with the project apart than completed.  any thoughts?

Views: 301

Reply to This

Replies to This Discussion

I think most projects can be stained after you complete them, with the execption of raised panel doors, the panels should be stained before assembly to allow for shrinkage

I'm building a dressercloset and I'll let it talk for it's self and you well see hal nice and clean it is and yes thats minwax.

No build up

is that the minwax polyshade, and what is your technique in applying?
Well it is minwax I dont know about the polyshade but after I get my parts done I stain the inside edges and the 1/4" ply wood and some of the 1/4" dont like stain and I just go in cicles intle it is covered.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_