Kreg Owners' Community

softclosevid.3GP 

 

Not sure if this video will work or not, but Hardware Hut sells these Knape and Vogt soft close shocks for Doors for around $3 each and they work great. I just wanted to pass this along to everyone.  I have the soft close drawer slides from them as well, but I haven't used them yet.  I will be sure to post when I do.

Views: 206

Reply to This

Replies to This Discussion

The video does work, sorry for it being so crude, but I think you get the idea.
Thanks Justin....just checked out the website. What is the common size you use ? or does it depend on the app?
Thank you Justin!  This is exactly what the wife and I are wanting for our cabinets. Let me know about the drawer slides.

Mike, I normally use a 22 inch drawer slide, this is the first time I have used the slides, but I believe the ones for the doors only come in 1 size.  I'm not sure if I answered your question or not.

 

Rick, no problem at all!!  You can't beat the price at all and they have an adjustment screw on the back of them just like a storm door to stiffen or loosen. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_