Tags:
Have you looked at Fine Woodworking's Design-Click_Build? It goes through every stage. You might want to start with his Setup for Woodworkers. He also has an e-book out on their website, too.
Hello John :)
You can post an image of your drawing and explain what you are trying to do and I will help you along if I can.
Open SketchUp, open up your drawing and then follow along....
1. Click on "File" in the Menu Bar and then click on "Export" and click "2D graphic".
2. Give your drawing a name and save it to a location where you can access easy. The file is saved as a ".png" image file.
3. Now just reply to your post here at the Community and add the image to your post. Just tell me what you want to do and I will get back to you.
James :)
Have you looked at Fine Woodworking's Design-Click_Build? It goes through every stage. You might want to start with his Setup for Woodworkers. He also has an e-book out on their website, too.
John, are you trying to make a cut-list from your drawing?
I've tried using CutList as well on a project that I'm planning but I can not seem to get it to take the sheets, it keeps giving a plan that use only boards.
Been busy, too. I provided the links in my post. Here are the full URLs. For Design.Click.Build = http://www.finewoodworking.com/blog/design-click-build
For the Setup = http://www.finewoodworking.com/item/2505/an-important-setup-step-fo...
.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service