Kreg Owners' Community

New user

I'm trying to join 1 x 4 poplar with the jig. I'm using clamps in my shop. I drill 2 3/4 holes in the end piece and everytime the end piece moves about 1/16th toward the end of the face piece when I itghten. Any thoughts would be greatly appreciated.

Views: 327

Reply to This

Replies to This Discussion

Clamp it, then clamp it tighter.

 

I'm serious, I've had the same exact problem where it moves just a tiny bit.  I use the right angle clamp and sometimes a couple other clamps to hold it fast where it won't move.  After you get the first screw in, you should be okay, but the first one will move if not clamped tight.

Thanks for the info. I just ordered 2 Kreg clamps from Rockler that I hope will make things easier. In the meantime I'll try to clamp it tighter or use biscuits where possible.
Thanks all. I'll try and post back with results.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

What thread and size screw to use 2 Replies

I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue

Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_