Screws for joining maple butcher block - Kreg Owners' Community2024-03-29T09:41:25Zhttps://kregjig.ning.com/forum/topics/screws-for-joining-maple?feed=yes&xn_auth=noHi Lee,
The course screws sho…tag:kregjig.ning.com,2011-08-04:2900167:Comment:3023802011-08-04T19:54:20.388ZRICHARD MORANhttps://kregjig.ning.com/profile/RICHARDMORAN
<p>Hi Lee,</p>
<p>The course screws should work fine, Just make sure you don't overdrive them and strip the holes. The glue will do a lot of the work holding the sections together. It's stronger than we realize. Also make sure you use enough pocket holes. Every 6 inches should suffice and when you move it to its final resting place, support the joint. Once it's in place, you'll have nothing to worry about.</p>
<p>Hi Lee,</p>
<p>The course screws should work fine, Just make sure you don't overdrive them and strip the holes. The glue will do a lot of the work holding the sections together. It's stronger than we realize. Also make sure you use enough pocket holes. Every 6 inches should suffice and when you move it to its final resting place, support the joint. Once it's in place, you'll have nothing to worry about.</p>