Kreg Owners' Community

All - 

I'm in the process of putting together my new Kreg router table (very excited).

I have come across two issues/questions I wanted to bounce off the crew here: 

1. I seem to be missing screws to attached the Kreg router table top to the Kreg router table metal base. Did I not get them in the box or do they not include them in either box? What should I use to connect the two?

2. (See attached photo) I am using a Bosch router, so I bought the Bosch insert plate. It mounts fine, but there several "extra" holes that I'm worried might cause problems as I feed stock. Am I worried about nothing? Should I just go back to the generic place and drill only the three necessary mounting holes?

Thanks!

Views: 313

Reply to This

Replies to This Discussion

Hi Jake in answer to your question ,you should be fine with the Bosch plate providing the holes are not a ridiculous size for example  2" diameter. The screws you mention should be in the box if not get on to Kreg customer support they will sort your screw problem out ,hope this helps Mick in the U.K. 

Thanks!

Pleasure.

Jake, the "extra" holes in the plate may be there for reasons below.  

It appears to me that the one on the left in the photo is for a starting pin.  Rest the work piece against the pin and roll it into the spinning bit for a smoother, more stable start.

I believe the three at the top in the photo are for a router lift or to accommodate routers for which the depth adjustment is accessible from the top of the table.  

Think your correct Tim , extra holes to accommodate router lift winding handles although my older Kreg plate does not have them , had to drill my own . 

Thanks, everyone! This has been helpful!

One more question: I didn't notice there was a router lift accessory Kreg makes (made?) until I watched the Kreg router tip DVD this weekend. But the Kreg site doesn't list the lift. I found it on Amazon, but curious if people have reviews of it.

Thanks!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_