Kreg Owners' Community

I would like to preface this post by letting you know that I am very pleased with the Kreg Precision Router Table package and Kreg's superior customer support but after using it for three years, I have come up with a few fixes and improvements I would like to share.

1)  Reference Photos A, B, C, & D:

Having purchased this router table with the current new design fence, I have found that the Micro Adjust mechanism is just too sloppy to make precision adjusts when setting up a Lock Miter bit so I machined my own solution using ¾" UHMW plastic and using a micro adjust assembly from a Woodhaven track that I had purchased some time ago.

Photo A shows it installed on the table and fence.  It mounts to the fence with a ¼ - 20 bolt using the predrilled hole in the track as show in Photo D.

Photos B and C show the device from different angles.  Photo C shows the raised part which fits into and rides in the track of the fence rail.  It keeps the UHMW block from skewing as the fence is moved back and forth.

Reference Photo E:

I also purchased the Kreg switch for the router table but found out that it was designed to mount on the right hand corner of the table and it was oriented 90º opposite from what I am used to with my other power tools.  I am right handed and I wanted to be able to quickly slap the paddle down with my left hand while maintaining control of the work piece with my right hand.  So, I used a piece of aluminum flat stock to fashion my own preferred mounting.  This allowed my to also mount a few needed tools on the front of the table (Photo F).

Reference Photo G:

This is a mount I made for the automatic vacuum switch.  I needed to keep it accessable because I frequently unplug the vacuum for use elsewhere.

Reference Photo H:

The dust port for this fence is a very poor design.  The slightest weight from the vacuum hose pops the dust port off the fence.  To alleviate this problem, I made a very thin strip of wood to jam between the catches on the dust port and the fence.  That strip of wood prevents those catches from disengaging.

Views: 496


Reply to This

Replies to This Discussion

I have been eyeing up this router table after I read the review on which scored it the best in its price category.

Are you still happy with it after having it 4 more months? 

Steve, Overall, I am very pleased with this router table system. In spite of the few issues I noted, Kreg support has been very responsive beyond my expectations.  They have replaced a couple components at no cost to me, the latest being the miter track which I determined was not manufactured to the correct specifications because I was unable to use a very high quality third party precision miter gauge with it.

One minor issue I am still experiencing is with the Kreg predrilled Bosch router plate which I cannot get leveled precisely on all four corners and sides.  As yet, I have not contacted support about this issue.

I have not had any experience with any other brand router tables so I am unable to make any comparisons. 

Thank you for letting me know your findings, I think despite the minor issues you have had it is a good buy and the best option in its price range so I'm going to pull the trigger on this once I have found the best deal.

Thank you.

 I needed to keep it accessable because I frequently unplug the vacuum for use elsewhere.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 


  • Add Videos
  • View All



No Description

Started by Joe in Beginners' Zone on Sunday.

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service