router table cabinet plans
Views: 9357
Replies to This Discussion
-
Permalink Reply by Matthew Brown on
-
How big is your top?? i am looking to build one to but dont know what a good size would be for a top.
-
Permalink Reply by John Schaben on
-
Hi Matthew - why don't you just take a cue from the commercial tables. Most are around 24 x 30 or so. I think the Kreg table is 24 x 32.
Matthew Brown said:How big is your top?? i am looking to build one to but dont know what a good size would be for a top.
-
Permalink Reply by justin waldron on
-
I am going to make mine out of MDF with Melamine, it's going to be around 24x32.
Matthew Brown said:How big is your top?? i am looking to build one to but dont know what a good size would be for a top.
-
-
http://books.google.com/books?id=cPsDAAAAMBAJ&pg=PA40#v=onepage... Here is a good router table plan that I found, but I can't figure out how to save and/or print.
-
Permalink Reply by Gary roofner on
-
Page is set to private mode. Which means you can't capture or print. I also tried doing apage capture. I don't know if hijak or any of the other programs could capture or not?
-
-
http://www.crestonwood.com/router.htm Gary, you're probably right, but check this out. This has a cutting list at the bottom and everything. It's Norm's router table that a guy built.
-
-
That is a pretty nice router table cabinet
-
-
Yes it is.
-
-
might use the plans and make a couple changes to it thought
-
-
Looks a lote alike but has good dustcollector on norms. Norms is the standard.
justin waldron said:http://www.crestonwood.com/router.htm Gary, you're probably right, but check this out. This has a cutting list at the bottom and everything. It's Norm's router table that a guy built.
-
Permalink Reply by steve kidd on
-
hi justin, look at mine on my page and if you like it i will send the measurements, i didnt have any real plans just what was in my head
-
-
Hey Steve, I appreciate it, but I've actually tracked down some plans. I haven't used plans before for anything, but I didn't feel like re-doing something like this, because I didn't plan for a certain part of it.
steve kidd said:hi justin, look at mine on my page and if you like it i will send the measurements, i didnt have any real plans just what was in my head
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
