Kreg Owners' Community

I hate to ask such remedial questions but I just ordered a dewalt dw611pk. I thought that (I have never had a new router before) all new routers came with a bushing, but after some reasherch I have learned that I'm on my own. I have big plans a want a bushing or two. For templates, sign making and maybe inlay. So how do I know what bushing to order I see a lot of talk about PC Bushings (brass) and that they are universal. Anyway any info would be helpful, oh and dados are also something I want to do.

Views: 5272

Reply to This

Replies to This Discussion

Howdy Tim.

I use both Dewalt and  Bosch standard routers, and the Kempston 99000 10 piece bushing set works fine with them. And according to a question posed on Amazon about the set, they should work fine on the compact router too. Here's the link: Response Involving the 611 Router.

On the topic of dados, you'll really only need a straight router bit for that procedure. So no bushing should be necessary.

Hope that helps, and good luck.

Thanks for the reply!

Hi tim ,the brass bushings seem too last longer.

By the way tim Christmas is coming ,how about a set of bushings or router bits on the Christmas list .My lot always get me tools that I am after, go steady. 


Congrats on obtaining a router.

You’ll love it.  It’s a very useful tool for wood working.


Peruse your router manual, as to what bushings and sizes are suitable for your machine.


Some router bases features a hole, that features a rabbet to facilitate a router bushing.

The rabbet allows the bushing shoulder to rest into the recess and a locking nut in placed on the threads to secure the bushing in place.  Insure the nut is tight.


Several router bushings and kits are available on today’s market, available from various wood working tool suppliers.


I’d suggest obtaining a bushing kit that contains several bushings, to accommodate various router bit diameters.  Personally, I prefer the router bushings, offered by Rockler.   The bushing kit contains several sizes.  If you get into sign making, get the recommended bushing to facilitate the router bit being used.

Long extrusions on the bushings, can be machined down to accommodate the template thickness.


Brass is a softer material to other metals, and is preferred by many---less likely to damage the router bits cutting edges.

Practice making cuts on scrap material before proceeding to the finished product.

Compared to what material(s) ?

michael evans said:

Hi tim ,the brass bushings seem too last longer.


The plunge base has provisions for attaching a router bushing.

Dewalt offers a round base, for the fixed base router, that also has the provision for a router bushing.

DEWALT DNP613 Round Sub Base for Compact Router

59031 - Router Guide Bushing Kit

This brass bushing set, offered by Rockler, will fit the Dewalt 611 bases.

Presently $30---normally $42.

Get it while supplies last.

Product Details

This dust collector adaptor is a very useful accessory.

It fits your plunge base.

It'll capture better than 80% of the dust.

Ken Darga said:

Plastic ones I have used they are rubbish ken.
Compared to what material(s) ?

michael evans said:

Hi tim ,the brass bushings seem too last longer.

Guys thanks, I plan on getting the brass bushing set. Good tip on the owners manual, I should have looked there first. I have had a router and used one in the past to make dado's, many years ago. Since I started woodworking again, I have not used it really at all. I'll also get the dust collector and the fence. As well as a good set of router bits. I started making a poor mans router table this week with 2'x3' sheet of 3/4 MDF. That will be a big help as well. I'm really looking forward to adding a extra touch to my projects with the router.

Product Details


I'd suggest obtaining this ''centering cone", DNP617.

It's necessary to insure the router bit is centered in the base and bushings.

Hi Tim,

Universal Router...

I find that this Rockler Universal Router Base, #31186, is much more useful than the edge guide offered by DeWalt.  The insert accommodates guide bushings.




Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service