Kreg Owners' Community

I hate to ask such remedial questions but I just ordered a dewalt dw611pk. I thought that (I have never had a new router before) all new routers came with a bushing, but after some reasherch I have learned that I'm on my own. I have big plans a want a bushing or two. For templates, sign making and maybe inlay. So how do I know what bushing to order I see a lot of talk about PC Bushings (brass) and that they are universal. Anyway any info would be helpful, oh and dados are also something I want to do.
Tim

Views: 5107

Reply to This

Replies to This Discussion

Hey, I'll get the centering bit. I thought I would only need that if I was making a base/jig? Your right on with that edge guide. Looks great but too late.
Thanks again.

Tim,

The "centering cone" is necessary to accurately center the base onto the router base frame.

This is a must, when you're using a router bit in the bushing---the bit needs to be accurately centered.

Insert the centering bit into the collet, hand-tighten the collet nut.

Position the base losely on the router base.

Insert the screws---

align the base opening with the cone, so it makes intimate contact around the cone and with the opening in the base.

Rotate the router collet by hand during centering.

Tighten the screws.

Remove the centering cone, and store it with your router bits and bushings.

Okay, thanks. I just thought the base and screws where predetermined. I'll be ordering one.
Tim

Good luck with building that table Tim. And if you have the time after you've finished, please post a photo so we can all see it. I'd like to have a visual of your handiwork. :)

Timothy Small said:

 I started making a poor mans router table this week with 2'x3' sheet of 3/4 MDF. That will be a big help as well. I'm really looking forward to adding a extra touch to my projects with the router.
I will for sure. Work 12 hour days till Wednesday but I am really excited about it. I manage to knock out a little shaker styled coffee for my son, who life in a tiny apartment with only a love seat in the living area. I just need to put some kind of finish on it, this week. I posted a picture on my profile page. And I'll post the router table picture soon.
Thanks

Countersunk holes in the router base plate should align with mounting holes in the router base---

and they will, if the holes are machined accurately.

However, I've found some to be off a tad, and required some fine tuning to make the mounting holes ''dead on".

Elongated holes in the base plate provides for adjustment.

"If you can't make it perfect, make it adjustable".

When the base plate in not centered with the collet, the router bit will interfere in the bushing.

Insure there is not metal to metal contact with the router bit cutters and the bushing.

Rotate the collet, back and forth, by hand to insure there is clearance, before operating the machine.

WARNING:

Perform with task with the machine disconnected from electrical service.

A router can be a very dangerous tool in the hands of an untrained user.

NEVER 
perform any adjustments, installing/removing a bit, or performing any service to the router with the power supply connected.

A spinning router bit can grab clothing material and cause serious bodily injury.

It'll be all over, but the shoutin'.



Timothy Small said:

>>>...I just thought the base and screws where predetermined. .../div>

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_