Kreg Owners' Community

I am asking some of the best wood workers for some plans for a Rocking Horse.  My first grand son is on his way and I want to make a solid hard wood rocking horse for him.   If anyone can help me with this I would greatly appriciate it.   Here is a picture of one I would like to go with, open to any ideas

                                     Thanks and God Bless.

Views: 478

Attachments:

Reply to This

Replies to This Discussion

Sorry but rocking horse isnt my thing but if you now some one with a rocking horse like the one you got or you could buy a book and I hope you got a good band saw and Ill look throw my books but you dont see many like that.

http://www.u-bild.com/ has a great series of plans with a rocking horse that I have built for two of my grandchildren

Michael,

There are many rocking horse plans on the market.

  Woodcraft for one, offers many---

http://www.woodcraft.com/category/2081472/rocking-horse-plans.aspx

 

  I'd start with smaller ones, then make larger ones, as he grows up.

 

One of my grandsons, now wants a full-size horse.

Thank you Ken Jim and David,  I found the plans for the one I have pictured on woodcraft and ordered it.  

  Thanks again, Michael.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_