Tags:
Blake, first of all I would call customer service in the morning @ 1-800-447-8638 , sure they can get you what you need to know !! And yes the front of the stop collar should line up with the line , towards the step of the bit !! I am sure Kreg CS will help you out , but if not let me know and I will get you the measurement,s you need from my K 3, have a good day JIM 111
Yes, Blake, Jim is correct. Please get in touch with Kreg Customer Service by calling 800-447-8638 or online: https://www.kregtool.com/customer-service/contact-us.aspx?source=1677. They will gladly help you out with replacements, etc. Thanks, and have a great day!
KregRep
The bits are all the same,measure from the stop to the step of the bit.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service