Kreg Owners' Community

Hi all, I have just joined the Kreg community, and one of the first videos I found was Jeff Devlin talking through the Workbench project plan... I really need a new workbench, but I cannot find the plans on the Kreg site... DOes anyone know where I can get them?

 

Thanks

Graeme

Views: 769

Reply to This

Replies to This Discussion

 Try free woodworking plans.com. You could subscribe to shop notes and they would send you a book called "The Complete Small Shop". I got my idea from that or, check around the web. Or ask someone if they got a plan.

http://www.kregtool.com/images/icons/2x4_bench.pdf

 

here is the link.  Just finished mine and added the kreg track and hardwood trim.  looks really good

Excellent, thanks Leslee and Paul
If you want to go really cheap but highly effective, Buy a pre cut 6 foot section of formica kitchen countertop. Lowes has one in white for 62 dollars, I think. Then build a simple box skeleton at a height that's comfortable for you and you're off to the races. 2x6's work better than 2x4's. Using cheap counter top gives you a solid, flat, smooth work surface. And the pre attached back splash keeps your stuff from rolling off the back. And after you beat the thing to death over time, buy another for 62 dollars.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_