Tags:
Thanks for your answer john....most folks in your area don't like to give pricing due to competition. They generally will want to schedule an appointment to look over the job. So, I was wondering about some sort of idea of a low to a high so I could price somewhere in the middle.
The materials the customer is providing is $2500.00 I was told. I was figuring like you, a premium for hidden fasteners. Dismantling and carting away and then of course assembly.....about $1200.00 ...What do you think, does that sounds fair for both sides. The deck is just a flat one 20 X 16.
Hi Darlene - I think you are in the ballpark. If you figure your time and tools at $30/hr that figures out to 40 hours for the job. Might even try at $1500. I think you will have all of 40 hours in it.
When I said to try and find out what the market was, I wasn't thinking in terms of calling the contractor. I was thinking of more covert means. Find a recently installed deck similar to the one you are planning.. admire it for awhile and casually ask the owner "about how much a thing like that cost?"
Good Luck
Hi Darlene - I think you are in the ballpark. If you figure your time and tools at $30/hr that figures out to 40 hours for the job. Might even try at $1500. I think you will have all of 40 hours in it.
When I said to try and find out what the market was, I wasn't thinking in terms of calling the contractor. I was thinking of more covert means. Find a recently installed deck similar to the one you are planning.. admire it for awhile and casually ask the owner "about how much a thing like that cost?"
Good Luck
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service