Kreg Owners' Community

Scott here and am new to the site. I started using the kreg jig a few weeks ago. My problem is that my holes never are smooth after drilling. Is there a trick to get nice, smooth holes? Do I start the drill bit fast or slow? Maybe it was the wood I was drilling into- cedar? Any suggestions would be welcome

Views: 637

Reply to This

Replies to This Discussion

high speed on drill and slow on pressure  on drill!!

What James said.  Soft woods such as pine and cedar will tend to leave fibers on the exit side of the bit because there is nothing supporting them on the cut.  Harder woods, including poplar will be a little bit cleaner but will still require sanding to remove stray fibers that are uncut with the bit.

 I think James is right " high speed on drill and slow on pressure on drill"

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_