Kreg Owners' Community

I was recently working on an oak computer cabinet using pocket holes to construct the cabinet. When I starting to fill the pocket holes with plugs I found out I did not have enough. I went to the two local big box stores and neither had oak plugs. So I was left with the problem of either ordering the plugs over the internet and waiting a week for them to arrive or making my own. I choose to try to make my own. I took a piece of 2 ½ X 12 inch scrap and bored 8 pocket holes in 2/3 of the board. I cut several 2 inch pieces of 3/8 oak dowel rod and placed them in the pocket holes. I took them to the band saw and cut off the excess dowel rod nearly flush. I used them to plug the holes and they worked perfectly. They required very little sanding and required little glue to keep them in place. I know have supply of oak, cherry, walnut and popular pocket hole plugs. I will never buy another pocket hole plug.

Views: 1084

Reply to This

Replies to This Discussion

Yep I 've been making my own for a year .I posted a video and have about 2000 views on it. Smart ideas make money for the user. The only difference is I cut 1 at a time on my portable table for usage in field if I run out I can cut what I need instead of driving to tool store and wait gas and time.Just make sure you have some various dowels in your truck

I forgot to mention I drilled a 1/4 inch hole through each pocket hole to enable getting the plug out after trimming.

James Waller said:

"If the shoe fits, wear it!" or in this case "If the plug fits, use it!".

I am sure this is a tip many on here will be trying out and perhaps save money for more screws. Good thinking, Jerry!

I do basicaly the same thing, only I use my multi tool. I buy dowels of different wood and keep them on hand also. very easy to do.

I usually don't use plugs cause my holes are hidden,  but I will keep that tip.  Thanks for the tip Jerry

Omit hole plugs, when it may be necessary to disassemble the project, at a later date, 

such as in moving to another site or facility.

Some projects may be too large to transport thru a doorway, or transport a long flight of stairs or multiple stairways, or it may to be too heavy to transport by one person, 

therefore, the use of ''pocket hole joinery'' is necessary, over other joinery methods.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Replacing existing slides but cannot remove drawer front

The Kreg slides are made to work with new drawers before putting on the drawer front. In my situation, I cannot remove the existing fronts which means when reversing the jig to hold the draw, it’s at an angle. Not sure what I should do to make them…Continue

Started by Jay Homeyer in General Woodworking Apr 25.

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone Apr 20.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_