Pocket hole joinery and round-over bits - Kreg Owners' Community2024-03-28T10:09:03Zhttps://kregjig.ning.com/forum/topics/pocket-hole-joinery-and?commentId=2900167%3AComment%3A232078&feed=yes&xn_auth=noHmm, never would have thought…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2334622011-05-26T22:05:23.012ZJohn Schabenhttps://kregjig.ning.com/profile/JohnSchaben
Hmm, never would have thought of that, I just rabbet the face frame into the side panel. <br></br><br></br><cite>Mandodad said:</cite>
<blockquote><div><p>It is not really hard to make, basically three cuts on the tablesaw. (see pic) I have also done it as a spline by cutting the groove in both parts and gluing a spline or biscuits in the groove. I really don't care for biscuits unless they are smothered in gravy...mandodad…</p>
<p></p>
</div>
</blockquote>
Hmm, never would have thought of that, I just rabbet the face frame into the side panel. <br/><br/><cite>Mandodad said:</cite>
<blockquote><div><p>It is not really hard to make, basically three cuts on the tablesaw. (see pic) I have also done it as a spline by cutting the groove in both parts and gluing a spline or biscuits in the groove. I really don't care for biscuits unless they are smothered in gravy...mandodad</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original"><img width="580" src="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original" class="align-full"/></a></p>
</div>
</blockquote> It is not really hard to make…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2332622011-05-26T19:36:08.409ZMandodadhttps://kregjig.ning.com/profile/mandodad
<p>It is not really hard to make, basically three cuts on the tablesaw. (see pic) I have also done it as a spline by cutting the groove in both parts and gluing a spline or biscuits in the groove. I really don't care for biscuits unless they are smothered in gravy...mandodad…</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original" width="580"></img></a></p>
<p>It is not really hard to make, basically three cuts on the tablesaw. (see pic) I have also done it as a spline by cutting the groove in both parts and gluing a spline or biscuits in the groove. I really don't care for biscuits unless they are smothered in gravy...mandodad</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original"><img width="580" src="http://storage.ning.com/topology/rest/1.0/file/get/1935448161?profile=original" class="align-full"/></a></p> Looks like kind of a complica…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2331652011-05-26T17:48:25.703ZJohn Schabenhttps://kregjig.ning.com/profile/JohnSchaben
Looks like kind of a complicated joint. Is that a loose tenon or spline? Seems it would need to run the entire height of the face frame. <br></br><br></br><cite>Mandodad said:</cite>
<blockquote><div><p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad…</p>
<p></p>
</div>
</blockquote>
Looks like kind of a complicated joint. Is that a loose tenon or spline? Seems it would need to run the entire height of the face frame. <br/><br/><cite>Mandodad said:</cite>
<blockquote><div><p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=original"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=RESIZE_1024x1024" class="align-full"/></a></p>
</div>
</blockquote> that is great choice
Mandod…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2330682011-05-26T17:10:47.178ZJens Jensenhttps://kregjig.ning.com/profile/JensJensen
<p>that is great choice</p>
<p><br></br> <br></br> <cite>Mandodad said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/pocket-hole-joinery-and#2900167Comment232977"><div><p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad…</p>
<p></p>
</div>
</blockquote>
<p>that is great choice</p>
<p><br/> <br/>
<cite>Mandodad said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/pocket-hole-joinery-and#2900167Comment232977"><div><p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=original"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=RESIZE_1024x1024" class="align-full" width="721"/></a></p>
</div>
</blockquote> this is how i have done round…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2329772011-05-26T14:25:18.785ZMandodadhttps://kregjig.ning.com/profile/mandodad
<p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad…</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=original" target="_self"><img class="align-full" src="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=RESIZE_1024x1024" width="721"></img></a></p>
<p>this is how i have done rounded corners with a face frame...using a tenon on the back of the front stile</p>
<p>and a groove in the edge of the side panel. Glue the panels together, then rout the large radius on the corner.</p>
<p>always works well and is strong...mandodad</p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=original"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935447195?profile=RESIZE_1024x1024" class="align-full"/></a></p> For edge trimming/banding, th…tag:kregjig.ning.com,2011-05-26:2900167:Comment:2327742011-05-26T03:12:06.054ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>For edge trimming/banding, that would get rounded, or the like, I'd go with biscuit joints or a splined joinery and glued---</p>
<p>without any screws, brads or nails.</p>
<p> </p>
<p>In edge banding, there are times, when one cannot get a ''closed'' tight fitting joint, so as to get an almost seamless appearance. To accomplish the feature, the surfaces would need to be super-straight and smooth, otherwise there'll be slight gaps, or hair-line cracks, which will need to be filled and…</p>
<p>For edge trimming/banding, that would get rounded, or the like, I'd go with biscuit joints or a splined joinery and glued---</p>
<p>without any screws, brads or nails.</p>
<p> </p>
<p>In edge banding, there are times, when one cannot get a ''closed'' tight fitting joint, so as to get an almost seamless appearance. To accomplish the feature, the surfaces would need to be super-straight and smooth, otherwise there'll be slight gaps, or hair-line cracks, which will need to be filled and finished---</p>
<p>tough task for many to accomplish.</p>
<p> </p>
<p>Screws may not draw the joints tight enough, to achieve a closed/tight fitted seam.</p> Hmmm Kreg 1 router 0
I don't…tag:kregjig.ning.com,2011-05-25:2900167:Comment:2323842011-05-25T22:17:04.832ZJohn Schabenhttps://kregjig.ning.com/profile/JohnSchaben
<p>Hmmm Kreg 1 router 0</p>
<p>I don't use screws anywhere near I think I will be routing. Since you glued it you could have removed the screws before routing although this would have left a hole to patch.</p>
<p>Bottom line - bummer</p>
<p>Hmmm Kreg 1 router 0</p>
<p>I don't use screws anywhere near I think I will be routing. Since you glued it you could have removed the screws before routing although this would have left a hole to patch.</p>
<p>Bottom line - bummer</p> Working with 3/4 I adjusted t…tag:kregjig.ning.com,2011-05-25:2900167:Comment:2326642011-05-25T15:51:19.697Zwill delaneyhttps://kregjig.ning.com/profile/will110
Working with 3/4 I adjusted the jig in between 3/4 and 1/2 to prevent the screw from going in to deep. I also used glue to make up for the strength. This is the only thing i can think of other then not using pocket holes for this application. What did you guy's do for this dilemma? Thanks
Working with 3/4 I adjusted the jig in between 3/4 and 1/2 to prevent the screw from going in to deep. I also used glue to make up for the strength. This is the only thing i can think of other then not using pocket holes for this application. What did you guy's do for this dilemma? Thanks yep been there done that with…tag:kregjig.ning.com,2011-05-25:2900167:Comment:2317142011-05-25T04:49:59.066Zmo khanhttps://kregjig.ning.com/profile/mokhan
yep been there done that with a cove moulding bit- you should have seen the sparks that came out when the bit hit the screw!
yep been there done that with a cove moulding bit- you should have seen the sparks that came out when the bit hit the screw! Ouch Will, I have done it to…tag:kregjig.ning.com,2011-05-25:2900167:Comment:2320782011-05-25T02:26:27.305ZMichael Campbellhttps://kregjig.ning.com/profile/MichaelCampbell
Ouch Will, I have done it too. Your not alone
Ouch Will, I have done it too. Your not alone