Kreg Owners' Community

New purchaser - bought a K4MS for a king platform bed I'm making,  Joining 2x4's and 2x6's.  I was confused by the stop collar guide.  I thought the setup for 1.5 materials was the *end* of the plastic rest and not the same marking as the 1.25 stop.  When I did some test holes, I had some screws poking through other side of the joints and I assumed I was overdriving the screws so I turned the driver to it's lowest setting and then drilled all my pocket holes. 

Now I realize that I've drilled all the pocket holes for my project too deep by about 1/4".  Can I get by just using 2in screws rather than the 2.5 you'd normally use to join 2x?  I really don't want to have to scrap the whole frame. 

FWIW it took a lot of googling to find out that 1.5 and 1.25 material both have the same stop collar setting.  That should really be explained better - the markings on the jig itself are confusing.  Why is the groove the bit sits in .25" longer than the furthest setting on the 1.5" side?  

Views: 575

Attachments:

Reply to This

Replies to This Discussion

Scott, 

Unfortunately I am not be able to give a definite yes or no on if a 2" screw would work, since this would not be based on the correct settings. I recommend testing on some scrap pieces to see if this option gives a strong enough joint for your application. You could offer additional support by drilling a third hole at the correct setting and using the 2 1/2" screw. 

The 1 1/2" and the 1 1/4" share the same marking due to the additional 1/2" of screw when you jump up from 1 3/8". In order to compensate for this additional 1/2", the pocket hole has to be shortened. The reason why the slot is longer than the furthest setting is that we wanted the slots to be uniform on both sides. As you can see, the marking for the 1 3/8" setting is farther out than the line for the 1 1/2" setting.  

Hopefully that clears up any confusion with the setup of the jig. If you have any additional questions, please feel free to contact us.  

While I was deciding on which Kreg jig to get (K5 vs K4) it was clear that the K5 setup was way easier. Although the K5 is more expensive it was well worth it. The front mounted handle, ratcheting clamp system and stop collar setting block are IMO what makes the K5 well worth the extra cash. The handy little sticker that relates material thickness to drill block height and recommended screw length also took the guess work out of it.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Toy box 2 Replies

Started by David J Agler in Beginners' Zone. Last reply by KregRep on Friday.

Clamp and glue thin borders 3 Replies

Started by Don Anderson in Beginners' Zone. Last reply by Ken Darga Oct 7.

routers and router stands 5 Replies

Started by tom hagan in Beginners' Zone. Last reply by R Anderson 12 hours ago.

Router guide

Started by Scott taube in Beginners' Zone Sep 26.

problem joining a table leg to the base 3 Replies

Started by Bradley Smith in Beginners' Zone. Last reply by Trace Farthing Sep 12.

Product Reviews

The Pocket Hole Joinery Book - Review

Posted by Daris R. on October 17, 2017 at 11:00pm

Kreg Mobile Project Center

I just picked up my new Kreg Mobile Project Center Item #KWS1000.

Wow!  I set it up in my basement and it is great addition to my Kreg items.  I was viewing a video where a review on this fine product was being made, which prompts…

Continue

Posted by John Tomkinson on May 5, 2017 at 5:34am — 2 Comments

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_