Kreg Owners' Community

Hello, first post after introduction. For a bunch of years I've been doing whatever project I'm working on using anything from a spiral binder of notebook paper to a cocktail napkin. I make notes on whatever is handy. I have often thought about some sort of clipboard type thing so I'd have a firm writing surface that also offers some organization. One thing is I don't want to spend a lot on something like this. $5 would be great. $20 would be max. Ok, ok, if I see something I really like I'll go $21. :)  Does anyone have ideas about this. It's not something that will make or break any job but sometimes a little more organization would be nice.

Thanks for any help.

Jack

Views: 242

Reply to This

Replies to This Discussion

Walmart has plastic Saunders SlimMate storage clipboards for under $10.  

Thanks Tim. It just so happens I was in Wal Mart yesterday and saw the slimmate thing. I got it and some graph paper.  Set me back almost $8. :)  I'm sure they have been there forever but until I'm looking for something I don't see it.  Thanks again.

Jack

Tim Grace said:

Walmart has plastic Saunders SlimMate storage clipboards for under $10.  

Try a place like staples or a big office supply store,If they don't have something probably not made!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_