First time writer.
I have to make panel doors for some cabinetry. How does the Kreg system hold up for panel doors? Any input would be helpful. I am using maple or cherry and will be using1/4" panels with 3/4 x2" rails and stiles.
Hi, Mike, Using expensive hardwood like you've choosen,you may choose another joinery method,other than pocket holes. Phillip's suggestion,using "cope and stick" ,is well worth some consideration,before you start. Using c&s,nothing shows on the interior side of the door,making the door beautiful,inside and out. Just a thought,tho. Dave
Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom). Shelf holes in the walls are drilled 2" O.C. Like most store-bought…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…