Kreg Owners' Community

I am Michel Jonson from London, i am new woodworker, please give me some information about this website and its features and its working also.

 

Bar Stools

Views: 204

Reply to This

Replies to This Discussion

Welcome; I am new also.  I have found this very informative.  There are many ideas and some plans available on the site.  I have done a few projects and have a few more in the works.  Good Luck and best wishes.
Hi Michel and welcome to the Kreg Community, There is plenty of great information to be found here, on many different subjects, if you look at the very top right hand corner  there's a Search box that you can use this for a more specific search. Under the Kreg banner there are different tabs which take you to different areas of this website you will notice that your in the FORUM section. If you scroll down the column on the right hand side of the page you will see a GETTING STARTED section, there is information on your Kreg Jig and also FREE Project Plans that you can build, and of course there are plenty of really nice people here that are willing to help answer your questions.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_