Kreg Owners' Community

Hi all I have a question I am a beginner and I am in need of replacing my table saw legs I move it around a lot but would like something solid that I don't have to move around space is limited can you share ideas

Views: 1226

Reply to This

Replies to This Discussion

Just the legs? Not the whole saw?

If it's a standard table saw, does the manufacturer make a rolling stand? Or if the the mounting holes are standard maybe you saw fits a rolling stand. These are maybe expensive, but they work great. I know both Bosch and DeWalt have nice stands. Another benefit is they fold up so great for getting out the way when not using. The major negative is just the expense.

Eli,

If you could post a picture of your saw, that would make offering suggestions easier.  Or, at least give the make and model of your saw.  Would like to help but don't have enough info to make a valid suggestion.

Don

ps. what breed of companion is in your profile pic?  I have 3 Dachshunds.


Aussie Mix I will get a photo of my table saw it is a ryobi the metal legs are weak and it doesn't seem to be sturdy and at times I have to stop a cut in order to check the table because it moves around, if I am cutting anything bigger than a 4x4 plywood the entire table lifts up on one side which is a bit concerning. What seems to make this really hard is I am disabled and trying to cut wood from my chair. 
Don Foley said:

Eli,

If you could post a picture of your saw, that would make offering suggestions easier.  Or, at least give the make and model of your saw.  Would like to help but don't have enough info to make a valid suggestion.

Don

ps. what breed of companion is in your profile pic?  I have 3 Dachshunds.

Eli,

I looked at Ryobi table saws on line and both models look to have flimsy legs.  The good news is you can custom build a base that should suit your needs. I suggest building a short table to mount the saw on using 4x4 lumber for the legs, 2x4 for the stretchers and 3/4 plywood for the top.  Once assembled bolt the saw through the plywood and you should have a solid base.

I would first find a height you find comfortable to work at.  Then deduct the height of the saw (from the top of the legs to the top of the saw) plus 3/4".  This is the height you want the 4x4 legs to be. Make the table top bigger then the saws footprint to allow the mounting bolts (the ones that mount the saw to the table) accessible from underneath.  Plus making it somewhat larger will make it more stable.

If you need the saw to be mobile Rockler offers flip down casters designed for workbenches that will allow you to move the saw when needed, but leave it solidly on the ground when in use.  I don't like locking casters for this application since movement is still possible.

If what I'm saying doesn't make sense, let me know.  I'll fire up my archaic drafting program and try to draw something to help.

Don

ps. I forgot to ask is your saw the model with the collapsible legs or the one with fixed legs?

CAUTION---

DO NOT cut large sections of sheet goods on a table saw---

it can potentially result in injury to persons, damage to nearby objects, and kick-back.

A 4x4 piece of PW is to large and unstable to be cut on a table saw with a small surface area, and short fence, like the Ryobi or similar small table saws.

There are other cutting tools more suitable for this task.

 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_