Well, you can daisy chain as many barrels together that you want. Just couple them together with hose or pipe at the bottom. Water will just flow from one to the other. Instead of three 45- gallon barrels, you have one 135-gallon reservoir.
I put this one together for my mother in law. The 500 gallon tank is not nearly big enough. I also included a close up pic of the brace that I made to support the 4 inch pvc supply to the tank. So even though there is no woodwork involved there are a few items which were created in my shop. The water flows from the gutters, through a sock filter into a 60 gallon sediment tank which overflows into the 500 gallon tank. Water in the tank is crystal clear. Guess I need to get a picture after the cardboard was removed from around the tank, it was there to keep the sand out of the paint when I painted the tank.
Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings? I scrolled through the pics in the community and all I saw were using a DIY base cabinet. I have an extra Kreg router…Continue
Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL. after years of waiting…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…