Kreg Owners' Community

I took an old door, cut it in half and proceded to make a corner shelf out of it. I started stripping it, but the wife wanted to leave it looking primitive.

I joined the two halves to 2x2 with pocket screws, of course.

Here's the topmost shelf. You can see the crown molding I put around the top, just to give it a little flavor. Notice the pocket screw into the 2x2 at the apex. Since the door panel was too thin for pocket screws I put 3 screws through the back into the shelf.

The hardware was left in its partially stripped state. I took the outside parts of the door handle off and epoxied the inside piece to keep it in place. I put a 2-1/2" piece of edge banding on the bottom shelf as it is about 2 inches above the bottom of the door. This gives it a 3-point support on the floor. Oh yes, the wife changed her mind and decided to paint the finished shelf.

Views: 922

Reply to This

Replies to This Discussion

Thanks, James.

James Waller said:
What a great use of something that usually may be discarded. Looks really wonderful, Steve!
Thats very clever

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service