Kreg Owners' Community

Does anybody have any plans for a murphy bed project?

 

I am in desprite need because of in-law moving in

 

Help!

Views: 4126

Reply to This

Replies to This Discussion

OK, now I understnad. The hardware that I have does not keep it up that securely and has some additional latches that are incorporated into the folding leg mechanisim.

 

Thanks for sharing the pics. I will not be working on the Murphy bed for a while. I am in the middle of a "L" shaped built-in book case project.

 

Onno

Out of the 500 you have made, have you ever maid one for a sleep number bed. If you have do they still work the same.

michael pope said:
literally have built over 500 of these beds over a 8 year period..if you need any insight...just ask..in the mean time..have a look at some of the ones I made either in my photos here , my personal web page ( http://mick1968.weebly.com/ ) or at www.hardwoodartisans.com.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_