Does anybody have any plans for a murphy bed project?
I am in desprite need because of in-law moving in
Help!
Tags:
Rockler has a Murphy bed plan for $9.99,
Hi
There are some nice plans at www.plansnow.com based on the create-a-Bed hardware. The hardware comes with their own plans as well, but are much more basic. I am also planning to build one and have the hardware, but other projects are more pressing at the moment.
Good luck
Onno
I looked at some of your pics Michael. Nice work. I have a question about the legs. You have nice sculpted legs... Is that a bit forward? I mean the design you have for the bed legs is very nice. My question is how you deal with the latch mechanism. In the original create a bed plans it uses these short funny legs that double as the latch system. I did not see a latch on your bed.
Just curious how you got around that.
Onno
Hi:
On this site in my projects, you can see what the Murphy Bed from Create a Bed is like. This project is not finished, it was stained and coated to provide for the In-Laws last winter and I will be finishing it wall to wall as soon as I get done with the Kitchen project to do list.
not quite sure what you mean about the latch mechanism except the foot mech. for when the bed is down..i eliminated the mechanical locking flip hinged foot with a dual purpose static shelf thats supported by corbels...like the look,function and the lack of the need to deal with a mechanism that may one day fail and cause damage to the bed or someone..
Onno Kok said:
I looked at some of your pics Michael. Nice work. I have a question about the legs. You have nice sculpted legs... Is that a bit forward? I mean the design you have for the bed legs is very nice. My question is how you deal with the latch mechanism. In the original create a bed plans it uses these short funny legs that double as the latch system. I did not see a latch on your bed.
Just curious how you got around that.
Onno
I guess what I meant was how does the bed stay in the up position? That is where those leg mechanisms were suppose to come in. Does your bed have a simpler clasp that keeps it closed? The Woodsmith magazine plans also changed the legs to a flip up type that doubles as a nice curved final when the bed is in the up position.
Thanks
Onno
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service