Kreg Owners' Community

Moving Cabinet above Refrigerator to make room for new Refrigerator

I have an idea and I really need some thoughts from all you expert cabinet/remodel/woodworkers. 

I have attached some pictures.  What I am wanting to do is move the cabinet forward and in front of the soffit(I think that is what they call it) and up against the ceiling.

I was thinking I could use a small french cleat to attach it to the soffit part and then screw it into the ceiling where the cross beams are.  

I have ordered a french door/freezer on the bottom frig and it is taller than what I have now.  I don't want to lose the cabinet and was thinking that moving it forward and up would give me better access to it and make use of it vs just removing it.

Any great ideas that include the least amount of destruction/construction would be most valued.  

Thank you as always!

Stephanie

Views: 1643

Attachments:

Reply to This

Replies to This Discussion

My other option, which I do not want to do, is to remove the cabinet permanently. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_