Mounting your jig - Kreg Owners' Community2024-03-29T06:00:46Zhttps://kregjig.ning.com/forum/topics/mounting-your-jig?commentId=2900167%3AComment%3A6064&feed=yes&xn_auth=noHi Rex,
The versitility of…tag:kregjig.ning.com,2011-07-29:2900167:Comment:2911762011-07-29T15:31:50.474ZRay Romerohttps://kregjig.ning.com/profile/RayRomero
<p>Hi Rex,</p>
<p> </p>
<p>The versitility of this jig is endless. I keep mine in the box I got it in. When I need to use it I just use 2 screws and attach it to any handy useable surface. I have even had it attached to the end of a saw horse. For a surface you will use again, drill through holes and use bolts instead of screws as screw holes will probably strip out over time. </p>
<p>Hi Rex,</p>
<p> </p>
<p>The versitility of this jig is endless. I keep mine in the box I got it in. When I need to use it I just use 2 screws and attach it to any handy useable surface. I have even had it attached to the end of a saw horse. For a surface you will use again, drill through holes and use bolts instead of screws as screw holes will probably strip out over time. </p> I mounted mine to the far end…tag:kregjig.ning.com,2011-01-26:2900167:Comment:950902011-01-26T18:29:06.937ZRalph Sarchttps://kregjig.ning.com/profile/RalphSarc
I mounted mine to the far end of my layout table that sits in the middle of my shop. Works great in that location and also allows me to attach the shop vac to it!<a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935442377?profile=original"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935442377?profile=RESIZE_1024x1024" class="align-center"/></a>
I mounted mine to the far end of my layout table that sits in the middle of my shop. Works great in that location and also allows me to attach the shop vac to it!<a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935442377?profile=original"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1935442377?profile=RESIZE_1024x1024" class="align-center"/></a> Thanks steve I found it.tag:kregjig.ning.com,2011-01-25:2900167:Comment:944572011-01-25T15:17:49.253ZGary roofnerhttps://kregjig.ning.com/profile/Garyyroofner
Thanks steve I found it.
Thanks steve I found it. issue 203 march 2011 page 28,…tag:kregjig.ning.com,2011-01-25:2900167:Comment:944532011-01-25T13:26:25.680Zsteve kiddhttps://kregjig.ning.com/profile/stevekidd
issue 203 march 2011 page 28, sorry i didnt reply till now, hope this helps. when i mount mine i think i will use a piece of plywood 10"x30" to mount jig with material supports on each side of jig. for me i dont use material stops. might use a "sink cutout" for my base. a sink cutout is where a sink is cut out of a piece of laminate, nice and smooth and flat, could double as an assembly table.<br></br><br></br><cite>John Schaben said:</cite>
<blockquote><div>Hi Steve - have you got a page number or…</div>
</blockquote>
issue 203 march 2011 page 28, sorry i didnt reply till now, hope this helps. when i mount mine i think i will use a piece of plywood 10"x30" to mount jig with material supports on each side of jig. for me i dont use material stops. might use a "sink cutout" for my base. a sink cutout is where a sink is cut out of a piece of laminate, nice and smooth and flat, could double as an assembly table.<br/><br/><cite>John Schaben said:</cite>
<blockquote><div>Hi Steve - have you got a page number or anything? I checked my last two issues, November 2010 and Dec/Jan 2010/2011 and couldn't find anything.<br/><br/><cite>steve kidd said:</cite><blockquote><div>check out the latest issue of WOOD, just happen to have a mount and storage box for the kreg jig</div>
</blockquote>
</div>
</blockquote> Hi Steve - have you got a pag…tag:kregjig.ning.com,2011-01-12:2900167:Comment:870622011-01-12T19:57:22.455ZJohn Schabenhttps://kregjig.ning.com/profile/JohnSchaben
Hi Steve - have you got a page number or anything? I checked my last two issues, November 2010 and Dec/Jan 2010/2011 and couldn't find anything.<br/><br/><cite>steve kidd said:</cite>
<blockquote><div>check out the latest issue of WOOD, just happen to have a mount and storage box for the kreg jig</div>
</blockquote>
Hi Steve - have you got a page number or anything? I checked my last two issues, November 2010 and Dec/Jan 2010/2011 and couldn't find anything.<br/><br/><cite>steve kidd said:</cite>
<blockquote><div>check out the latest issue of WOOD, just happen to have a mount and storage box for the kreg jig</div>
</blockquote> check out the latest issue of…tag:kregjig.ning.com,2011-01-11:2900167:Comment:868712011-01-11T19:19:33.646Zsteve kiddhttps://kregjig.ning.com/profile/stevekidd
check out the latest issue of WOOD, just happen to have a mount and storage box for the kreg jig
check out the latest issue of WOOD, just happen to have a mount and storage box for the kreg jig I confess, I didn't go throug…tag:kregjig.ning.com,2011-01-02:2900167:Comment:825032011-01-02T03:13:29.986ZJohn Schabenhttps://kregjig.ning.com/profile/JohnSchaben
<p>I confess, I didn't go through all 100+ posts so I apologize if this has already been presented. I mounted the K-3 jig to a piece of 1x3 and used a miter slot clamp block to tie it to the top of the table saw. Work height is right and got plenty of bench space.</p>
<p> </p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1935440931?profile=original" target="_self"><img class="align-left" src="http://storage.ning.com/topology/rest/1.0/file/get/1935440931?profile=original" style="padding: 15px;" width="640"></img></a></p>
<p> </p>
<p> </p>
<p>The box has an assortment of screws, keeper of the bit, driver and hex…</p>
<p>I confess, I didn't go through all 100+ posts so I apologize if this has already been presented. I mounted the K-3 jig to a piece of 1x3 and used a miter slot clamp block to tie it to the top of the table saw. Work height is right and got plenty of bench space.</p>
<p> </p>
<p><a target="_self" href="http://storage.ning.com/topology/rest/1.0/file/get/1935440931?profile=original"><img width="640" src="http://storage.ning.com/topology/rest/1.0/file/get/1935440931?profile=original" class="align-left" style="padding: 15px;"/></a></p>
<p> </p>
<p> </p>
<p>The box has an assortment of screws, keeper of the bit, driver and hex wrench. Also has Collar depth and recommended screw charts glued to inside of the lid and coated with urethane. It also has the Kreg jr and micro jig.</p>
<p> </p> http://kregjig.ning.com/forum…tag:kregjig.ning.com,2010-12-20:2900167:Comment:806922010-12-20T00:29:25.907ZJens Jensenhttps://kregjig.ning.com/profile/JensJensen
<p><a href="http://kregjig.ning.com/forum/topics/protecting-your-bits" target="_blank">http://kregjig.ning.com/forum/topics/protecting-your-bits</a></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/mounting-your-jig?page=9&commentId=2900167%3AComment%3A80690&x=1#2900167Comment80626"><div>Hey,<br></br> <br></br> I find carrying it in the case simple, and small parts aren't lost as for mounting. I always have a couple of saw horses available around and any scrap piece of plywood 1/2" or…</div>
</blockquote>
<p><a href="http://kregjig.ning.com/forum/topics/protecting-your-bits" target="_blank">http://kregjig.ning.com/forum/topics/protecting-your-bits</a></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/mounting-your-jig?page=9&commentId=2900167%3AComment%3A80690&x=1#2900167Comment80626"><div>Hey,<br/> <br/> I find carrying it in the case simple, and small parts aren't lost as for mounting. I always have a couple of saw horses available around and any scrap piece of plywood 1/2" or so. I always have a 4'x4' across the horses use a couple of screws out of your kit to fasten. makes a large enough work area and breaks down with little to no effort. Stored in case keeps everything neat and simple. Nothing clumsy to carry or store. Allows you to use clamping plate or other clamps available<br/> <br/> Joseph</div>
</blockquote> Smart man you are and not hav…tag:kregjig.ning.com,2010-12-20:2900167:Comment:806902010-12-20T00:26:25.803ZJens Jensenhttps://kregjig.ning.com/profile/JensJensen
<p>Smart man you are and not having it all split up and parts here and there. I have a Miller falls 1/2 drill no reverse so it is old and it has been in a wooden case my day used when he owned it and it has never failed a drill out yet ,The only thing I did was took some 3/8 viynal tube and put over the end of the bit toprotect it</p>
<p><br></br> <br></br> <cite>Joseph E. Esquivel said:…</cite></p>
<p>Smart man you are and not having it all split up and parts here and there. I have a Miller falls 1/2 drill no reverse so it is old and it has been in a wooden case my day used when he owned it and it has never failed a drill out yet ,The only thing I did was took some 3/8 viynal tube and put over the end of the bit toprotect it</p>
<p><br/> <br/> <cite>Joseph E. Esquivel said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/mounting-your-jig?page=9&commentId=2900167%3AComment%3A80626&x=1#2900167Comment80626"><div>Hey,<br/> <br/> I find carrying it in the case simple, and small parts aren't lost as for mounting. I always have a couple of saw horses available around and any scrap piece of plywood 1/2" or so. I always have a 4'x4' across the horses use a couple of screws out of your kit to fasten. makes a large enough work area and breaks down with little to no effort. Stored in case keeps everything neat and simple. Nothing clumsy to carry or store. Allows you to use clamping plate or other clamps available<br/> <br/> Joseph</div>
</blockquote> Hey,
I find carrying it in t…tag:kregjig.ning.com,2010-12-19:2900167:Comment:806262010-12-19T21:15:38.123ZJoseph E. Esquivelhttps://kregjig.ning.com/profile/JosephEEsquivel
Hey,<br />
<br />
I find carrying it in the case simple, and small parts aren't lost as for mounting. I always have a couple of saw horses available around and any scrap piece of plywood 1/2" or so. I always have a 4'x4' across the horses use a couple of screws out of your kit to fasten. makes a large enough work area and breaks down with little to no effort. Stored in case keeps everything neat and simple. Nothing clumsy to carry or store. Allows you to use clamping plate or other clamps available<br />
<br />
Joseph
Hey,<br />
<br />
I find carrying it in the case simple, and small parts aren't lost as for mounting. I always have a couple of saw horses available around and any scrap piece of plywood 1/2" or so. I always have a 4'x4' across the horses use a couple of screws out of your kit to fasten. makes a large enough work area and breaks down with little to no effort. Stored in case keeps everything neat and simple. Nothing clumsy to carry or store. Allows you to use clamping plate or other clamps available<br />
<br />
Joseph