Where would a person find these earth magnets on this pic? Great plan for a great jig!!!
KregRep said:I thought I'd add a few more photos to this thread from a great setup put together by this community's own "JD" JD put some ingenious solutions into his setup including magnets to hold his drill/driver bits in place as well as his allen wrench. Check out this great work by JD!
Great question. One good way to have your Kreg Jig ready at the drop of a hat is to mount the jig (using the 4 screw holes in the base) directly to a small piece of plywood which can be quickly thrown on top of your workbench and clamped down to secure. Some owners will also drill small holes in the plywood to hold their drill bit, driver bit, allen wrench, etc. It's up to you to customize as much as you'd like!
It'd be great to see what some of the owners here have come up with! Post some photos, guys!
i have a k2 i use a 24x30 and clamp it to my work bunch
I have been using a single clamp to secure by Kreg. I like your's much better. It solves the problem that has kept me from using it on large panel projects.........Thanks for the tip. Tim, Charlotte, NC
David Dean said:i have a k2 i use a 24x30 and clamp it to my work bunch