Mounting K4 or K5 Jig to Mobile Project Center

[Glenn Walker]

Any recommendations on how to attach a K4 or K5 Jig to a Mobile Project Center? What hardware should be used?

[KregCS]

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  

[Glenn Walker]

Thank you!

[Gary roofner]

Here is how I mount my k3.

[Steven Lee]

seems like it should have been designed to be fastened with at least the kreg clamps. I store my K5 in the storage case.

[Aaron Schrank]

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

KregCS said:

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  

[Mike Goetzke]

Aaron Schrank said:

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

+1

[Gary roofner]

There is no right or wrong way to install.

[Michael Lusk]

What is the Mobile Project Center? Please include photo if possible.