Considering purchasing the Kreg Precision Table. Does anyone have any experience mounting the Dewalt DW625 ?
Tags:
Ok. Change of plans. I am going with a Bosch MRC23EVSK router instead of the Dewalt. Thanx for any consideration on my first question.
Hi Andrew ,no experience of mounting either router but have mounted a triton in my kreg benchtop table.My kreg table came with a bullseye template ,simply align on the mounting plate insert .In your preferred position and drill holes for your router ,word of warning there is a semi circle indent on the bullseye template that's for a hole for a router winding handle keep a ways back from the fence .If you go on you tube there are some videos on kreg router plate and router mounting ,hope this helps .
Thanx Michael for the heads up about the semi circle.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service