Kreg Owners' Community

Hi guys , I'm thinking of purchasing the Kreg Micro Drill Guide but I do have one question , do I use the same screws as the regular Kreg Jig or are there special (small) size screws for the micro guide. I can't seem to find any info anywhere. 

Views: 237

Reply to This

Replies to This Discussion

just purchased the micro jig but haven't used it yet.  you need to use #6 screws fine thread only for all wood.  if you wish to plug the pocket holes in 1/2 in material they suggest setting the stop collar at the 5/8 mark and use 3/4 in length screws.  Can't wait to try it.

Well, more accurately, you need the pan head screw, the washer head doesn't fit in the pocket. Threadwise, still use thread based on stock with the exception of 3/4" screws which are only available in fine thread.

Charles Andrews said:

just purchased the micro jig but haven't used it yet.  you need to use #6 screws fine thread only for all wood.  if you wish to plug the pocket holes in 1/2 in material they suggest setting the stop collar at the 5/8 mark and use 3/4 in length screws.  Can't wait to try it.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Adaptive Cutting System/Saw Blade

I have had the ACS for about a year.  Was wondering if there any other blades, like a Diablo, that will fit the saw?Continue

Started by Randall H Gress in Beginners' Zone Feb 20.

AutoMaxx 6" clamp not working

I have been using the Automaxx 6" clamp for two plus years, and recently the clamp is impossible to close the handles to secure the work and my jig. I cannot close the handles no matter how much pressure I can exert. I open the clamp to max to reset…Continue

Tags: clamp, inch, 6, Automaxx

Started by Anthony M Calabrese in Other Kreg® Products Feb 12.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_