Kreg Owners' Community

Obviously for pocket joinery having the wood pieces cut square is critical to having a good joint.  This minimizes the likelihood of overtightening screws, as well giving a stronger more attractive joint.  Does anyone routinely measure the angle of their table saw blade, using something like a Wixey digital angle gauge?  Is it worth the $20-30 to get one?

Views: 366

Reply to This

Replies to This Discussion

I use a small square to check when I adjust something on both my table saw and mitre saw. My mitre saw was a bit off from new. I have a digital square/level but that is a bit too big and a bit painful to set at 90.

I use a digital angle gauge for my table saw, it also works great leveling my travel trailer. 

As for the saw, the built in marker never stays in place so I can't count on it. There are also times when I'm cutting odd angles like between 53-68 degrees, not many angle gauges can measure it accurately enough. I also use it to check the angle on my miter saw when doing crown molding to make sure I've got good sharp cuts.

I have the Wixey & use it to set any angle except 45 & 90. I have trusted squares for that. I played around with 22 1/2 angles on 2" wide by 12"L & made a very nice glueable cylinder.

I use the Wixey gauge anytime I adjust the angle of the blade. It's worth every penny I paid for it.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_