Tags:
My situation was somewhat similar to yours. MDF drawers in a very fancy new bedroom set. I did not know this since my bride made the purchase without me.
The drawersw started to fall apart and I wanted to fix them properly. Using the Kreg jig I made drawer boxes first out of 11X6 white wood. Then I tried cedar (love that smell). Since this was my first project with jig I was apprehensive at best.
After finishing one dresser my wife opted for cedar all around. I have since used the jig on all sorts of tings, but the drawers?
save yourself some grief and use wood rather than composite. it will last longer, smell better and is easier to used.
rick varady
montanadogs@yahoo.com
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service