Picked up a new saw today. Can't wait to see it in action. I was planning to get a 12" sliding saw but couldn't justify the price. I was able to get this saw [used] for 1/2 the price. I've found many good reviews for this model and some have chosen it over the larger models available. I'm sure it will be up to par for my DIY / weekend-warrior projects. We'll see how it goes.
Tags:
Good choice Brian...or at least the same choice I made! LOL
I would have loved to get Bosch 12" Glide Miter Saw but couldn't justify the $930 retail price. So I got the Makita at Home Depot for less than $500 and it has worked out beautifully.
The attached photos show the first project I used it on, a remodel of a bedroom into a library with crown molding.
Hope you get a lot of good use and successful projects out of yours.
Phil
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service