I am looking for the picture of a router table with a Dust collection system in the back drop. I believe there is a child in the foreground showing off his dad and his handy work. I would like to ask them a few questions. I found it the one time and lost the location or who made it. Any help in locating the picture or the people who built would much appreciated.
Yes, Justin your is the one.
After looking at all your pictures I am quite impressed. I too would like to put in a dust collection system along one wall and into the can and then out into the open air outside that is.
I have several questions but the one I wanted to know about first was How does that dust collection system "trash can" perform? I bought one and have yet to set it up. Do you have it attached to a vaccum or a dust collector? In order for you to understand what my questions are I will take some pictures of what I have and what my ideas are.
Where did you get the plans for the table itself? I would like to modify the plans a bit. Again I will take pictures and post them and share my ideas. I have limited space and would like to just use the top half. mounting it on a I guess it would be a buffet thingy.
Thanks for responding.
justin waldron said:
Hey Greg, I think you looked at mine. I can answer any questions for you if it was mine you saw.
Here is the site I got the plans from, there's a cut list and everything here. http://www.crestonwood.com/router.htm The trash can lid works very well!! I use it with a dust collector and I am very impressed on how it catches all of the big chips and the fine dust goes to the collector bag.