Kreg Shelf Pin Jig help - Kreg Owners' Community2024-03-29T06:54:25Zhttps://kregjig.ning.com/forum/topics/kreg-shelf-pin-jig-help?commentId=2900167%3AComment%3A746803&x=1&feed=yes&xn_auth=noGonna try the my circular saw…tag:kregjig.ning.com,2015-07-10:2900167:Comment:7468032015-07-10T13:36:52.030ZRod Standifordhttps://kregjig.ning.com/profile/RodStandiford
<p>Gonna try the my circular saw cutting jig. It's straight and then the jig up against that.</p>
<p></p>
<p>Thanks for your replies</p>
<p></p>
<p>Rstandi</p>
<p>Gonna try the my circular saw cutting jig. It's straight and then the jig up against that.</p>
<p></p>
<p>Thanks for your replies</p>
<p></p>
<p>Rstandi</p> Hi Rod, I sometimes use a pie…tag:kregjig.ning.com,2015-07-09:2900167:Comment:7463242015-07-09T01:44:23.539ZJim Delormehttps://kregjig.ning.com/profile/JimDelorme
<p>Hi Rod, I sometimes use a piece of scrap plywood cut at a starting height from the bottom of the cabinet to get my holes to line up. you could use the same tactic for front to back to keep your jug on track.</p>
<p>Hi Rod, I sometimes use a piece of scrap plywood cut at a starting height from the bottom of the cabinet to get my holes to line up. you could use the same tactic for front to back to keep your jug on track.</p> Hi Rod, about the most accura…tag:kregjig.ning.com,2015-07-08:2900167:Comment:7461492015-07-08T15:57:34.334ZJay Boutwellhttps://kregjig.ning.com/profile/JayBoutwell
<p>Hi Rod, about the most accurate method would be to use a framing square and determine a straight and square line off the back of the cabinet. If you do not want to mark a line on the surface of the cabinet then use tape such as painters tape and use the edge as a you would a pencil line. </p>
<p></p>
<p> Short of using the shelf pin guide you could use an old trick that I have often used on odd places, and use a piece of squared up peg board. use the front of the cabinet to square it up…</p>
<p>Hi Rod, about the most accurate method would be to use a framing square and determine a straight and square line off the back of the cabinet. If you do not want to mark a line on the surface of the cabinet then use tape such as painters tape and use the edge as a you would a pencil line. </p>
<p></p>
<p> Short of using the shelf pin guide you could use an old trick that I have often used on odd places, and use a piece of squared up peg board. use the front of the cabinet to square it up and use the peg holes as a template. They are evenly spaced and make a quick solution to your type of problem.</p>
<p></p>