Kreg Screw Quality - Kreg Owners' Community2024-03-29T16:00:48Zhttps://kregjig.ning.com/forum/topics/kreg-screw-quality?commentId=2900167%3AComment%3A533686&feed=yes&xn_auth=noThanks for the input Ken.tag:kregjig.ning.com,2014-01-21:2900167:Comment:5953712014-01-21T23:07:44.069ZRichard Ljungquisthttps://kregjig.ning.com/profile/RichardLjungquist
<p>Thanks for the input Ken.</p>
<p>Thanks for the input Ken.</p> Rich,
Many of the negative po…tag:kregjig.ning.com,2014-01-18:2900167:Comment:5942002014-01-18T02:04:03.977ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Rich,</p>
<p>Many of the negative posts aren't justified.</p>
<p>There are many out there who find something to complain about.</p>
<p>There's many who don't know the proper technique or process for using and installing screws.</p>
<p>Some haven't learned. </p>
<p></p>
<p>Screws are designed for their intended purpose, and when properly used, there's not a problem.</p>
<p></p>
<p>I've seen people putting machine screws into wood and have complained about the screws not holding.</p>
<p>They…</p>
<p>Rich,</p>
<p>Many of the negative posts aren't justified.</p>
<p>There are many out there who find something to complain about.</p>
<p>There's many who don't know the proper technique or process for using and installing screws.</p>
<p>Some haven't learned. </p>
<p></p>
<p>Screws are designed for their intended purpose, and when properly used, there's not a problem.</p>
<p></p>
<p>I've seen people putting machine screws into wood and have complained about the screws not holding.</p>
<p>They are clueless.</p>
<p></p>
<p><br/> <cite>Richard Ljungquist said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?commentId=2900167%3AComment%3A593938&xg_source=msg_com_forum#2900167Comment593938"><div><div class="xg_user_generated"><p>I'm planning on building several projects using my Kreg Jig this year. I've also noticed a few negative posts about the new screws on various woodworking sites over the past year. I'm just wondering if there really was any serious issues with these screws and if so have any changes been made to correct them?</p>
</div>
</div>
</blockquote> Trevor,
When installing screw…tag:kregjig.ning.com,2014-01-18:2900167:Comment:5941992014-01-18T01:43:24.799ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Trevor,</p>
<p>When installing screws in hardwoods, I always lube the screws---</p>
<p>screw-lube, bees wax or parafin.</p>
<p>The lubrication reduces the risk of breakage.</p>
<p></p>
<p>I don't have any problems with screws breaking---including the zinc plated screws.</p>
<p></p>
<p>Also, I make it a practice to lube long threaded screws, for deep thread engagement, including softwoods, such as pine.</p>
<p></p>
<p>PS---drive the screw half-way in---reverse the screw and install it 'til…</p>
<p>Trevor,</p>
<p>When installing screws in hardwoods, I always lube the screws---</p>
<p>screw-lube, bees wax or parafin.</p>
<p>The lubrication reduces the risk of breakage.</p>
<p></p>
<p>I don't have any problems with screws breaking---including the zinc plated screws.</p>
<p></p>
<p>Also, I make it a practice to lube long threaded screws, for deep thread engagement, including softwoods, such as pine.</p>
<p></p>
<p>PS---drive the screw half-way in---reverse the screw and install it 'til it bottoms out.</p>
<p>This process removes any wood fibers, than accumulate in the root of the screw, causing binding.</p>
<p>This is especially necessary when installing screws in thin sections.</p>
<p> </p>
<p>When the screw enters the wood, between the growth rings, it has a tendency to spread the wood apart---</p>
<p>hence the reason for this proceedure.</p>
<p></p>
<p>NOTE: DO NOT install a screw into the end-grain.</p>
<p>If you must, install a dowel in the work-piece and install the screw into the dowel.</p>
<p></p>
<p>When drilling pilot holes into wood, its necessary to select the proper drill-bit diameter.</p>
<p>The drill-bit dia should be equal to the screws minor (root) diameter.</p>
<p>The intent is for the screw threads to grip into the wood.</p>
<p>You don't want the shank dia to spread the wood apart---else the wood is subjected to fracture.</p>
<p></p>
<p>PS---a small dia screws, a little sliva will suffice, on the leading end of the screws.</p>
<p></p>
<p>I've made several projects and made repairs, using small #2 & #4 screws.</p>
<p></p>
<p><br/> <br/> <cite>Trevor stafford said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?commentId=2900167%3AComment%3A593938&xg_source=msg_com_forum#2900167Comment591805"><div><div class="xg_user_generated">Just a notion I wonder if the bronze screw were passivated thus allowing them to drive in easier? Using the steel screws wipe the screw across a candle to ease screwing and stop the screw possibly heating and thus snapping, tedious I know better than ruining the job because broken screws are near impossible to remove</div>
</div>
</blockquote> I'm planning on building seve…tag:kregjig.ning.com,2014-01-17:2900167:Comment:5939382014-01-17T19:03:02.830ZRichard Ljungquisthttps://kregjig.ning.com/profile/RichardLjungquist
<p>I'm planning on building several projects using my Kreg Jig this year. I've also noticed a few negative posts about the new screws on various woodworking sites over the past year. I'm just wondering if there really was any serious issues with these screws and if so have any changes been made to correct them?</p>
<p>I'm planning on building several projects using my Kreg Jig this year. I've also noticed a few negative posts about the new screws on various woodworking sites over the past year. I'm just wondering if there really was any serious issues with these screws and if so have any changes been made to correct them?</p> Just a notion I wonder if the…tag:kregjig.ning.com,2014-01-06:2900167:Comment:5918052014-01-06T16:35:22.482ZTrevor staffordhttps://kregjig.ning.com/profile/Trevorstafford822
Just a notion I wonder if the bronze screw were passivated thus allowing them to drive in easier? Using the steel screws wipe the screw across a candle to ease screwing and stop the screw possibly heating and thus snapping, tedious I know better than ruining the job because broken screws are near impossible to remove
Just a notion I wonder if the bronze screw were passivated thus allowing them to drive in easier? Using the steel screws wipe the screw across a candle to ease screwing and stop the screw possibly heating and thus snapping, tedious I know better than ruining the job because broken screws are near impossible to remove And I will add that Kreg, to…tag:kregjig.ning.com,2013-04-02:2900167:Comment:5336862013-04-02T00:03:32.604ZDrew Thompsonhttps://kregjig.ning.com/profile/DrewThompson
<p>And I will add that Kreg, to their credit, has offered to send me a replacement box - I'm not looking for free product though (not that I object to free... but its not the point) - more simply chiming in that... with more than a couple people having snapped the zinc plated screws - I've found a few posts around the net on that, now that I'm looking - it might be something Kreg might want to followup and test around. I'm going to be watching my next few boxes. For Kreg, since they are…</p>
<p>And I will add that Kreg, to their credit, has offered to send me a replacement box - I'm not looking for free product though (not that I object to free... but its not the point) - more simply chiming in that... with more than a couple people having snapped the zinc plated screws - I've found a few posts around the net on that, now that I'm looking - it might be something Kreg might want to followup and test around. I'm going to be watching my next few boxes. For Kreg, since they are watching - I do have the box still - would there be a SKU or tracking number on it that would give you any lot/mfg info you might need?</p> I too, am having snapped scre…tag:kregjig.ning.com,2013-04-01:2900167:Comment:5333522013-04-01T15:53:27.809ZDrew Thompsonhttps://kregjig.ning.com/profile/DrewThompson
<p>I too, am having snapped screw issues. My first box of 100 zinc screws, 7 of them snapped. Drill clutch is set quite light, the wood is not splitting or cracking, and the heads aren't seating/joint isn't pulled together. I"m hoping its just a bad batch - but its something worth keeping an eye on.</p>
<p>I too, am having snapped screw issues. My first box of 100 zinc screws, 7 of them snapped. Drill clutch is set quite light, the wood is not splitting or cracking, and the heads aren't seating/joint isn't pulled together. I"m hoping its just a bad batch - but its something worth keeping an eye on.</p> Ryan,
''hydrogen embrittlemen…tag:kregjig.ning.com,2013-02-15:2900167:Comment:5217202013-02-15T02:52:48.141ZKen Dargahttps://kregjig.ning.com/profile/KenDarga
<p>Ryan,</p>
<p><span>''hydrogen embrittlement'' <span style="text-decoration: underline;">is not</span> a rare occurrence.</span></p>
<p></p>
<p>Ryan McLaughlin said:</p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality#2900167Comment521652"><div class="xg_user_generated"><p>>>> Thanks Ken! It could have been a rare occurrence ...<<<</p>
<p></p>
<p></p>
<p> …</p>
</div>
</blockquote>
<p>Ryan,</p>
<p><span>''hydrogen embrittlement'' <span style="text-decoration: underline;">is not</span> a rare occurrence.</span></p>
<p></p>
<p>Ryan McLaughlin said:</p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality#2900167Comment521652"><div class="xg_user_generated"><p>>>> Thanks Ken! It could have been a rare occurrence ...<<<</p>
<p></p>
<p></p>
<p> </p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?xg_source=activity#2900167Comment521861"><div><div class="xg_user_generated"><p></p>
</div>
</div>
</blockquote>
</div>
</blockquote> Thanks Ken! It could have bee…tag:kregjig.ning.com,2013-02-15:2900167:Comment:5216522013-02-15T00:15:03.916ZRyan McLaughlinhttps://kregjig.ning.com/profile/RyanMcLaughlin
<p>Thanks Ken! It could have been a rare occurrence then. It's just that the bronze screws looked like great quality.</p>
<p> </p>
<p>-Ryan<br></br> <br></br> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?xg_source=activity#2900167Comment521861"><div><div class="xg_user_generated"><p>''hydrogen embrittlement'' <span>can occur during various manufacturing operations. </span></p>
<p></p>
<p><span>Electroplating is a major cause of hydrogen…</span></p>
</div>
</div>
</blockquote>
<p>Thanks Ken! It could have been a rare occurrence then. It's just that the bronze screws looked like great quality.</p>
<p> </p>
<p>-Ryan<br/> <br/> <cite>Ken Darga said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?xg_source=activity#2900167Comment521861"><div><div class="xg_user_generated"><p>''hydrogen embrittlement'' <span>can occur during various manufacturing operations. </span></p>
<p></p>
<p><span>Electroplating is a major cause of hydrogen embrittlement.</span></p>
<p>The result of unintentional introduction of hydrogen into susceptible metals during forming or finishing operations and increases cracking in the material.</p>
<p><span> </span></p>
<pre><em><font color="#0000A0" size="3" face="Arial"> </font></em></pre>
<p></p>
</div>
</div>
</blockquote> Hi KregCS,
I really appreci…tag:kregjig.ning.com,2013-02-15:2900167:Comment:5216492013-02-15T00:10:44.590ZRyan McLaughlinhttps://kregjig.ning.com/profile/RyanMcLaughlin
<p>Hi KregCS,</p>
<p> </p>
<p>I really appreciate your offer and standing by Kreg products. I guess my frustration with the new screws was the fact I was assembling an angled walnut face frame when the screw snapped off causing a major inconvenience. It surprised me because I have driven thousands of the bronze screws before without an issue and I want to have peace of mind that the new screws are manufactured to the same quality. Thanks for your feedback!!</p>
<p>-Ryan<br></br> <br></br> <cite>KregCS…</cite></p>
<p>Hi KregCS,</p>
<p> </p>
<p>I really appreciate your offer and standing by Kreg products. I guess my frustration with the new screws was the fact I was assembling an angled walnut face frame when the screw snapped off causing a major inconvenience. It surprised me because I have driven thousands of the bronze screws before without an issue and I want to have peace of mind that the new screws are manufactured to the same quality. Thanks for your feedback!!</p>
<p>-Ryan<br/> <br/> <cite>KregCS said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/kreg-screw-quality?xg_source=activity#2900167Comment521641"><div><div class="xg_user_generated"><p>I'm sorry to hear that you have had an issue with our screws. I was curious if you have used any other screws in that box. I'm just trying figure out if it was just one screw that was defective or if it was the whole box. Either way if you would send me your shipping information and the screw that you had issues with in a private message I would be more than willing to send you a replacement box. </p>
</div>
</div>
</blockquote>